While it is technically possible to remove hair with sandpaper, it is not recommended as it can be very painful and damaging to the skin. Sandpaper is abrasive and can cause irritation, cuts, and even infection if not used properly. There are much safer and more effective methods for hair removal, such as shaving, waxing, or using depilatory creams. It is best to avoid using sandpaper for hair removal and opt for more appropriate and gentle methods. **

Emery cloth is similar to sandpaper. It is an abrasive material that is used for sanding and smoothing surfaces. Emery cloth is made by gluing fine emery particles to a cloth backing, similar to how sandpaper is made with sand particles on a paper backing. Both sandpaper and emery cloth are used for tasks such as smoothing wood, removing rust, and preparing surfaces for painting or finishing. **

The amount of wood that can be removed with sandpaper depends on the grit of the sandpaper, the pressure applied, and the type of wood being sanded. Generally, coarse grit sandpaper (around 60-80 grit) can remove a few millimeters of wood with moderate pressure and repeated sanding. Finer grit sandpaper (around 120-150 grit) will remove less wood per pass, but can still be effective with patience and persistence. It's important to use caution and test on a small area to avoid removing too much wood. **

The grit of sandpaper you choose depends on the task at hand. For rough sanding or removing old paint, a lower grit (such as 60-80) would be more suitable. For smoothing surfaces or preparing for painting, a medium grit (such as 120-150) would be ideal. For fine finishing or between coats of paint, a higher grit (such as 220-400) would be the best choice. **

While sandpaper may provide some level of grip on a surface, it is not recommended to use it as a substitute for grip tape on a skateboard. Grip tape is specifically designed for skateboards, providing the right amount of grip and durability needed for skating. Sandpaper may wear out quickly, not adhere properly to the skateboard deck, and potentially damage the shoes of the skater. It is best to invest in proper grip tape for optimal performance and safety while skateboarding. **

I recommend using 120-grit sandpaper for general sanding and smoothing of surfaces. This grit is coarse enough to remove imperfections and rough spots, but also fine enough to leave a smooth finish. It is a versatile option for most sanding projects and can be used on wood, metal, and other materials. Additionally, it is readily available at most hardware stores and is a popular choice among DIY enthusiasts and professionals alike. **

For sanding a bicycle, it is best to use medium-grit sandpaper, such as 120-150 grit. This grit is coarse enough to remove any old paint or rust, but not so coarse that it will leave deep scratches in the metal. It will provide a good surface for new paint or primer to adhere to, and will help smooth out any imperfections in the metal. Always make sure to clean the surface thoroughly after sanding to remove any dust or debris before applying new paint or finish. **

For sanding latex paint, it is recommended to use fine-grit sandpaper, such as 220-grit or higher. This will help smooth out the surface without removing too much paint. Coarser grit sandpaper may be too abrasive and can damage the paint finish. It is important to sand lightly and evenly to avoid creating uneven patches or scratches on the painted surface. **